Push Pin (Retainer)
Part Number: USEP-4860379AA

This Part Fits The Following:

• Dodge Magnum (LX) (2005-2008); Front Fender Liner Mounting - 12 Required.
• Dodge Magnum (LX) (2005-2008); Rear Fender Liner Mounting - 12 Required.
• Dodge Charger (LX) (2005-2010); Front Fender Liner Mounting - 12 Required.
• Dodge Charger (LX) (2005-2010); Rear Fender Liner Mounting - 12 Required.
• Dodge Challenger (LC) (2008-2010); Rear Fender Liner Mounting - 12 Required.
• Dodge Stratus (JR) (2005-2006); Front Crossmember - 2 Required.
• Dodge Intrepid (LH) (2002-2004); Front Fascia Mounting - 4 Required.
• Dodge Intrepid (LH) (2002-2004); Rear Fascia Mounting - 4 Required.

• Chrysler 300 (LX) (2005-2010); Front Fender Liner Mounting - 12 Required.
• Chrysler 300 (LX) (2005-2010); Rear Fender Liner Mounting - 12 Required.
• Chrysler Sebring (JR) (2005-2006); Front Crossmember- 2 Required.
• Chrysler Concorde (LH) (2002-2004); Front Fascia Mounting - 4 Required.
• Chrysler Concorde (LH) (2002-2004); Rear Fascia Mounting - 4 Required.
• Chrysler 300M (LH) (2002-2004); Front Fascia Mounting - 4 Required.
• Chrysler 300M (LH) (2002-2004); Rear Fascia Mounting - 4 Required.
•  
• M8 x 1.25″ x 20mm Stem Diameter 7MM.

• Quantity Required: Varies with Application
• Sold As: Each
• Packaging: Poly Bag
• Group: Body-Exterior
• Additional Shipping: No
•  
• Weight: 0.20 pounds
• Length (inches): 0.75
• Width (inches): 0.75
• Height (inches): 0.5
•  
• Vehicle Make: Chrysler; Dodge
• Body Codes: LX,LE,LH,LC,JR
• LHD or RHD: Any
• Color: Black
• Construction: Plastic
• Hardware: N/A
• Position-Front or Rear: Varies with Application
• Position-Inner or Outer: N/A
• Position-Left or Right: Varies with Application
• Position-Upper or Lower: N/A
•  
• Axle: Any
• Engine: Any
• Transfer Case: Any
• Transmission: Any